{"product_id":"high-quality-direct-to-film-gang-sheets-14-x18","title":"High Quality Direct to Film Gang Sheets 13”x23”","description":"\u003cp\u003e \u003cstrong\u003eUpload your gang sheet with Transparent PNG Baxkground at 300 DPI FOR BEST RESULTS.\u003c\/strong\u003e \u003cstrong\u003eSize must be 13”x23”.\u003c\/strong\u003e  Sheets are shipped 13”x23” Sheets. \u003c\/p\u003e\n\u003cp\u003eAny questions, send us a message on instagram  @signs_by_fds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-68_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-70_\"\u003e\u003cspan\u003eTeflon Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-71_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-73_\"\u003eA Teflon sheet is needed to cover the transfer during pressing. This prevents the film from sticking to the heat press and the possibility of burn marks on the fabric, especially delicate ones.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-80_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-82_\"\u003e\u003cspan\u003eOther Optional Accessories\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-83_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-85_\"\u003eYou may need a lint roller (to remove dust\/lint from garments before pressing), heat-resistant tape (to hold a detailed small DTF transfer), and heat transfer pillows (for shirts with seams or buttons). \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-83_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-85_\"\u003ePressing Instructions\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-95_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-97_\"\u003e\u003cspan\u003eStep 1: Preheat the Garment and Press\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-98_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-100_\"\u003e\u003ca href=\"https:\/\/www.xtool.com\/products\/xtool-apparel-printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/a\u003eTurn on your Heat Press and set it to the appropriate temperature and time. Set it to 320°F (for cotton) or 280°F (for polyester) and preheat the shirt for 5 seconds. This removes any moisture and wrinkles, providing a plain ground for heat transfer. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-101_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-103_\"\u003e\u003cspan\u003eStep 2: Place DTF Transfer on the Garment\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-104_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-106_\"\u003eLay the cured DTF transfer film such that the printed design touches the fabric and the blank side of the film faces up. Small designs can shift during the pressing phase, we recommend using a heat-resistant tape for securing them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-104_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-106_\"\u003e\u003cspan\u003eIf you’re printing on the backside of the shirt, or if your garment has thick seams or buttons nearby, you might insert a heat-pressing pillow inside the shirt to ensure even pressure.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-111_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-113_\"\u003e\u003cspan\u003eStep 3: Press the Transfer\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-115_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-117_\"\u003e\u003cbr\u003eCover the transfer film with a Teflon sheet to protect it. The temperature, pressure, and time need to be set based on the fabric. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-118_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-120_\"\u003eFor cotton or its fabric blends, set the temperature between 320°F to 350°F, pressure at High, and heat press for 8 to 10 seconds. For synthetic ones, lower the temperature to 275°F to 280°F and heat press for 10 to 15 seconds.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-121_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-123_\"\u003eIn cases when the design has sharp details, rub the design (film intact) with a squeegee and heat press again for about 5 seconds. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-gplwNw jZQEok pf-124_ pf-heading-1-h3\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-126_\"\u003e\u003cspan\u003eStep 4: Cool and Peel the Film\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-128_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-130_\"\u003eThe transfer film can be both hot and cold film; peel off accordingly. Since most of the DTF films are cold, wait until the transfer is no longer hot to the touch, about 30 seconds to a minute. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-131_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-133_\"\u003e\u003ca href=\"https:\/\/www.xtool.com\/products\/xtool-heat-press\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/a\u003eThe design should now be transferred to the garment. Take your time to ensure no parts of the design lift with the film. If you notice any part of the design is still stuck to the film or not adhered to the fabric, lay it back down, cover it, and press again for a few more seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-131_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cstrong\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-133_\"\u003ePOST PRESS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-134_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-136_\"\u003eSome experts perform a second press after peeling. For that, cover the design area (no film) with a Teflon sheet and press it one more time at the same temperature 5-10 seconds . \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"sc-kBRnVi iJhfkH pf-83_ pf-text-1\" data-pf-type=\"Paragraph\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-dAFaGQ ghivjN pf-85_\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Signs by fds","offers":[{"title":"13.5”x23”","offer_id":45613626228932,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/7844\/1924\/files\/IMG-1246.webp?v=1766135164","url":"https:\/\/signsbyfds.com\/products\/high-quality-direct-to-film-gang-sheets-14-x18","provider":"Signs by fds","version":"1.0","type":"link"}